Thursday 24 October 2013

suva

Suva® 95 refrigerant

DuPont™ Suva® 95, a PFC-based refrigerant, is the industry standard replacement for R-13 and R-503 in very low temperature applications [below -40°F to -150°F (-40°C to -101°C)] such as medical freezers and environmental chambers.  It offers advantages over R-23, including significantly lower compressor discharge temperatures, making it the best choice to ensure optimum systems reliability for critical applications.  Suva® 95 can be used in new equipment and can also be used to retrofit existing systems.

ASHRAE
R-508B; A1 Safety Classification
Replaces
R-13, R-23, and R-503
Applications
  • Very low temperature [below -40°F to -150°F (-40°C to -101°C)]:
    • medical freezers
    • environmental chambers

Benefits
  • Endorsed by many OEMs.
  • Longer equipment life: Lower discharge temperature than R-23, increases compressor service life.
  • Increased cooling capacity: 30% greater cooling capacity than R-13.
  • Best match for R-503.
  • Lower retrofit cost than R-23.

Phaseout Schedule
Consult the specific regulations in your country or region.

Lubricant Recommendation
POE

Wednesday 23 October 2013

refrigerant

How to Choose the Right R-22 Retrofit Refrigerant


This will provide a technical overview of the many different R-22 retrofits available today and how to choose the right retrofit solution. Also a brief discussion of R-22 market dynamics will be covered. A summary of what products are offered and for which specific application each one is best suited will be included along with selection criteria. The tradeoffs and compromises that occur when using retrofit refrigerants in a system specifically designed for R-22 will also be addressed. After attending this seminar, you will: >Understand the R-22 EPA activity and market response>Learn why some refrigerants may be better than others for your retrofit applications>Understand why there are no real “drop-in” retrofits but may still have hassle-free options>Become familiar with the most important criteria to consider when selecting a new R-22 alternative refrigerant 

Tuesday 22 October 2013

EMKARATE

What is EMKARATE???


The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with basefluids that are specifically formulated to deliver optimum performance with minimal additive levels.

he requirements of today’s refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC’s and HCFC’s as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.

Monday 21 October 2013

why us

Why to choose TAYAL AND COMPANY???


Its all because....
We have created a positive image in such competitive markets by offering superior quality products. Our range is supplied under the utmost care of experts in compliance with international quality standards. WE are ahead of our competitors due to following reasons:
> Industry leading prices
> Robust construction of products
> Effective maintenance services
> Cost effective and reliable products
> Adherence to international standards
> Capacious warehouse
> Wide distribution network
> Expedite delivery


Saturday 19 October 2013

floron 22

Owing to our expert professionals, we offer high grade floron 22. This range of gases is known for its features like being environment friendly and purity. Our range of floron 22 is used in different sectors for cooling purposes. We make sure that these are stored in non-reactive cylinders and tanks. These cylinders are leakage free and can easily be transported.


Friday 18 October 2013

Inetresting Facts on the Refrigerator

Inetresting Facts on the Refrigerator


History

The refrigerator was invented by Jacob Perkins in 1834. The original liquid used as a coolant was ammonia, which killed many consumers. Freon was later used. Early refrigerators were made with a wood cabinet and a compressor. As advances were made, steel and porcelain became more common. The basic demand for a refrigerator occurred because humans needed a reliable source of cooling for their food because ice was unreliable.

Mechanics of a Refrigerator

In older fridges, a coolant known as freon or chloro-fluoro-carbon was pumped through tubing. A pump pushes the liquid through the tubing, which evaporates. This evaporation removes the heat from the refrigerator and freezer, thus causing it to become cool. In newer fridges a gas called HFC-134a is used. A compressor pressurizes this gas, and it heats up. The gas is forced through a very small opening called an expansion valve. It loses pressure and returns to a gas. As it cools in the tubing, it pulls the heat out of the refrigerator compartment. The cold gas is then pulled back up by the compressor to start the process over again.

Styles of Refrigerators

Most consumers are familiar with the basic design of a fridge. You are not limited to these designs. A variety of custom designs are available. A transparent fridge exists which is completely clear, and all the contents inside can be seen. It is a big seller in Japan. A fridge has been designed with a built-in beer dispenser. For the college student, a modular fridge is available; several small fridges are stacked on top of each other so each student has his own private fridge.

Energy Savings

Replace your old fridge. If you have an out-of-date fridge purchased in 1980 or earlier, you can save yourself $50 a year, as of January 2011, simply on energy savings. In fact, a fridge made in 1993 or earlier can cost an average of $110 each year in electricity. Buying an Energy Star labeled refrigerator can save on your utility bill. Old inefficient refrigerators and freezers in the U.S. cost the American consumer about $4.9 billion dollars of extra expenses each year.

Life Expectancy

On average, the life expectancy of a refrigerator is 14 years. Homes in the U.S. contain about 44.5 million fridges that are over 10 years old. Many of these units serve as secondary units to a household. If each home replaced its old, inefficient fridge with a new Energy Star certified unit, consumers would save $2 billion a year in utility costs and enough energy to light up 9.2 million homes for a year.


Thursday 17 October 2013

refrigeration system

Mechanical Refrigeration Systems

The first patent for mechanical refrigeration was issued (1834) in Great Britain to the American inventor Jacob Perkins. Mechanical refrigeration systems are based on the principle that absorption of heat by a fluid (refrigerant) as it changes from a liquid to a gas lowers the temperature of the objects around it. In the compression system, which is employed in electric home refrigerators and commercial installations, a compressor, controlled by a thermostat, exerts pressure on a vaporized refrigerant, forcing it to pass through a condenser, where it loses heat and liquefies. It then moves through the coils of the refrigeration compartment. There it vaporizes, drawing heat from whatever is in the compartment. The refrigerant then passes back to the compressor, and the cycle is repeated.
Prior to 1996, the refrigerants used in electric refigerators were chlorofluorocarbons (CFCs). However, because of increasing scientific evidence that the CFCs are harmful to the ozone layer of the stratosphere, they were banned by international treaty, the Montreal Protocol, after Jan., 1996. Transitional compounds, such as hydrochlorofluorocarbons (HCFCs), which are less harmful to the ozone layer, are to be used in their place until the year 2020. By that time compounds such as the hydrofluorocarbons (HFCs), which are benign to the ozone layer, are expected to have replaced HCFCs.
In the absorption system, widely employed in commercial installations, ammonia is usually used as a refrigerant to cool brine (water containing calcium chloride or sodium chloride) that is then sent through pipes to cool the refrigerated space. The steam-jet system is used where temperatures below 32°F (0°C) are not required; water is used as the refrigerant. Airplanes are cooled or heated through an air cycle system. Research and development is being carried out to apply the Peltier effect (see thermoelectricity) in various practical refrigeration systems.

Tuesday 15 October 2013

warehouse

WAREHOUSE


A warehouse is a commercial building for storage of goods. Warehouses are used by manufacturers, importers, exporters, wholesalers, transport businesses, customs, etc. They are usually large plain buildings in industrial areas of cities and towns and villages. They usually have loading docks to load and unload goods from trucks. Sometimes warehouses are designed for the loading and unloading of goods directly from railways, airports, or seaports. They often have cranes and forklifts for moving goods, which are usually placed on ISO standard pallets loaded into pallet racks. Stored goods can include any raw materials, packing materials, spare parts, components, or finished goods associated with agriculture, manufacturing and production.

Polyolester oil

Polyolester oil


Polyolester oil, commonly called POE oil, is a type of Synthetic oil used in refrigeration compressors that is compatible with the refrigerants R-134a, R410A and R-12. Its recommended by experts as a replacement for HFC's. Along with R134A mineral oil its recommended as a replacement for R12 mineral oil as R134A does not mix well with mineral oil. These wax free oils are sugggested for usage with chlorine free HFC systems as they provide better lubrication and stability and are more miscible with HFC refrigerants. They can meet the lubricity requirements to those of mineral oils used with CFC's and HFC's. They are compatible with most lubricants in the market. It is noted that the viscosity of the oil increases with temperature. the dispersion behavior of this oil has also been the subject of a lot of study. it is also considered by some to be a good additive to engine oil

Monday 14 October 2013

fact

What is Refrigerant and its properties?


REFRIGERANT:    A heat carrier must be use to move heat from the interior of a cabinet or room to the outside. Thus in refrigerating system fluids which absorb heat inside the cabinet and release it out side are called refrigerant. The ideal refrigerant would be one that could liberate all the heat that it is capable of absorbing. The refrigerant changes from liquid to vapor during the process of absorbing heat and condenses again to liquid while liberating heat in most of the refrigerating systems.

PROPERTIES OF A GOOD REFRIGERANT: The properties of a good refrigerant for commercial use are:

· it should be nonpoisonous.

· it should be non explosive

· it should be non corrosive

· it must be nonflammable

· Leaks should be easy to detect.

· Leaks should be easy to locate.

· It should operate under low pressure.

· Part moving in the fluid should be easy to lubricate.

· It should be nontoxic (not harmful if inhaled or if spilled on skin).

· It should be a stable gas.

Friday 11 October 2013

article

Don't Treat Today's Refrigeration 

Systems with Yesterday's Techniques

Today's refrigeration technicians are confronted with refrigeration systems that are vastly different than those serviced last century, but they still continually use the "tried and true" repair/maintenance techniques that used to be very effective.

The hydrofluorocarbon (HFC) refrigerants and polyolester (POE) oils of today's systems have different chemical make-ups than their predecessors--hyrdrochlorofluorocarbon (HCFC) or chlorofluorocarbon (CFC) refrigerants and mineral oil. Essentially the new refrigerants are more stable than the old refrigerants, but the oils are less stable.

Grandpa probably wanted nothing but refrigerant and oil in his refrigeration systems, but today's service technicians don't have that choice. The new refrigerants and oils for the 21st Century already have many built-in additives that were never present in the old refrigerants and oils.

The chlorides used in the CFC refrigerants had excellent anti-wear characteristics. Unfortunately chlorides are one of the reasons CFC refrigerants have been deemed bad for the environment. To fill the anti-wear void created when chlorides were eliminated from the new HFC refrigerants, oil manufacturers put in phosphorus and other additives. Plus there is a full range of aftermarket products that a service technician is enticed to add into a system. Generally, additives within a system fall under three different categories:

Additives that are built into today's new HFC's by the refrigerant and oil manufacturers that promote lubricity and anti-wear. These additives usually get consumed during the life of the unit resulting in sludge formation and increased wear or oxidation over time that damage the system.
Additives that are not intentionally added to the system, but get into the system during the manufacture or installation of the equipment. (such as acid, air, or moisture)
Aftermarket additives introduced by a technician that remain in the system and increase the formation of sludge or alter the equilibrium chemistry of the oil.
In general, the refrigerant and oil manufacturers have ensured that their proprietary compositions of additives are compatible within each other. However, combining these chemical additives with acid neutralizers, untested flushing fluids or leak stopping chemicals is a recipe for disaster. Many technicians also fail to realize that water and air in a system is more of a problem with the new synthetic oils.

In general, the refrigerant and oil manufacturers have ensured that their proprietary compositions of additives are compatible with each other. However, combining these chemical additives with acid neutralizers, dyes, or leak stopping chemicals can be a recipe for disaster. Many technicians also fail to realize that water and air in a system are more of a problem with the new synthetic oils.

Thursday 10 October 2013

overview

Refrigerant Gases - FLORON 22, FLORON 134a, BLENDS (R404a, R410a, R407c)

Product Overview


Refrigerant gases, if not chosen carefully, could cause irreversible damage to compressors, coils and valves in the long run. Hence sourcing the product from a reliable and high-quality supplier becomes imperative, which is where we come into the picture.
Our fluorochemical products include refrigerants HCFC-22 and HFC-134a besides other products. We are the first and the only manufacturer of HFC-134a in India. Our formidable network of 105 outlets pan-India and robust manufacturing capacities make us the market leader in both these products, with 40% overall market share.


Wednesday 9 October 2013

refrigeration cycle


Refrigeration cycle 

A sequence of thermodynamic processes whereby heat is withdrawn from a cold body and expelled to a hot body. Theoretical thermodynamic cycles consist of nondissipative and frictionless processes. For this reason, a thermodynamic cycle can be operated in the forward direction to produce mechanical power from heat energy, or it can be operated in the reverse direction to produce heat energy from mechanical power. The reversed cycle is used primarily for the cooling effect that it produces during a portion of the cycle and so is called a refrigeration cycle. It may also be used 
In the refrigeration cycle a substance, called the refrigerant, is compressed, cooled, and then expanded. In expanding, the refrigerant absorbs heat from its surroundings to provide refrigeration. After the refrigerant absorbs heat from such a source, the cycle is repeated. Compression raises the temperature of the refrigerant above that of its natural surroundings so that it can give up its heat in a heat exchanger to a heat sink such as air or water. Expansion lowers the refrigerant temperature below the temperature that is to be produced inside the cold compartment or refrigerator. The sequence of processes performed by the refrigerant constitutes the refrigeration cycle. When the refrigerant is compressed mechanically, the refrigerative action is called mechanical refrigeration.
There are many methods by which cooling can be produced. The methods include the noncyclic melting of ice, or the evaporation of volatile liquids, as in local anesthetics; the Joule-Thomson effect, which is used to liquefy gases; the reverse Peltier effect, which produces heat flow from the cold to the hot junction of a bimetallic thermocouple when an external emf is imposed; and the paramagnetic effect, which is used to reach extremely low temperatures. However, large-scale refrigeration or cooling, in general, calls for mechanical refrigeration acting in a closed system. 

Tuesday 8 October 2013

FRIDGE FACT

SOME MORE FRIDGE FACTS


Fridge Fact:
The first household refrigerator produced by General Electric in 1911 was based on a design by a French Cistercian monk and physics teacher named Marcel Audiffren. The monk’s sulfur dioxide refrigerating process took the form of a wooden refrigerator named the Audiffren. It cost $1000, which was twice as much as an automobile.
Fridge Fact:
Freon was the primary refrigerator coolant for many years. However, Freon has been banned as a refrigerator coolant because of its ozone depletion potential. The newer coolants are known by the acronym HCFC, which stands for hydrochlorofluorocarbon, plus a number. Two refrigerator coolants in current use are HCFC-22 and HCFC-142b.
Fridge Fact:
Older refrigerators must be disposed of properly because of the environmentally damaging materials they contain. Old refrigerators with Freon coolant and CFC-bearing insulation are of particular concern. To ensure your old refrigerator is disposed of safely and legally, contact your local utility company or locate an appliance recycler in your area.
Fridge Fact:
A crisper is a refrigerator drawer or compartment used to keep vegetables and fruit fresh and “crisp” (thus the name). Crispers work by maintaining humidity levels suitable for fresh vegetables and fruit. For healthier and better tasting produce, choose a refrigerator that has a crisper with separate temperature and moisture controls.
Fridge Fact:
In 2006, nanotechnology researchers at the University of Alabama and Belgium’s Hasselt University proposed an idea for the world’s smallest refrigerator. Known as a Brownian refrigerator, the molecular-scale device would theoretically be used to keep nanoscale machines cool and control temperatures during molecular biology experiments (it would be far too small for leftovers).
Fridge Fact:
Most people have a refrigerator magnet or two. Louise J. Greenfarb of Henderson, Nevada, has over 32,000 different refrigerator magnets. She is appropriately known as “The Magnet Lady.” Her collection was declared the world’s largest by the Guinness Book of World Records. Over 7,000 of her magnets can be seen at the Guinness Museum in Las Vegas.

Monday 7 October 2013

fact

Fridge Fact:

A refrigerator typically accounts for around 10% of a home’s power bill. About 1/3 of a refrigerator’s cold air can escape when the door is open, which is why a closed door keeps energy costs down. So does using energy-efficient appliances: an ENERGY STAR refrigerator uses less power than a 75-watt light bulb.

Fridge Fact:

Salt water, commonly known as brine, is sometimes used as a food preservative and refrigerant. Medieval peoples discovered that brine absorbs heat as it evaporates, and placed containers in brine to keep them cool. In America, meatpacking got its name in the 118th century because workers packed meat into brine barrels.

Fridge Fact:

November 14th is National Clean Out Your Refrigerator day. Fresh foods should be kept only one to two days in a refrigerator. Cooked meats can be stored for three to four days. To keep food longer, wrap it in airtight foil or plastic wrap after use and store at a temperature below 40 degrees F.

Fridge Fact:

Did you know that Albert Einstein co-invented a refrigerator? He and his former student Leo Szilard received a patent for it in 1930. Coolants used at the time could be toxic, and Einstein got the idea for a simple, single-pressure absorption refrigerator when he read about a sleeping family killed by leaking refrigerator coolant.

Saturday 5 October 2013

eco friendly gas

R134a refrigerant – is it really Environmentally Friendly?



Sure it may have a “0″ ozone depletion rating so why is the Australian Government and other nations going to “ban” it and phase it out by 2015?
The simple answer to the question is that it may have a “0″ ozone depletion rating but the other side of that coin has not been exposed sufficiently. Like most things there’s a downside to R134a. To start with it has a global warming rating some 1300 times higher than carbon dioxide. Sure the refrigerant it replaced (R12) had higher ratings and sure R12 needed to go but was R134a the right choice and did we know the long term effects R134a was going to have and now is having on our environment?
And now with the reports coming out on the increases in component production costs (including the cost to the environment), the high compressor failure rates with R134a as opposed to R12, and the fact that it does have a global warming rating that is too high to continue using it, one has to wonder why anyone would buy a product today that claims R134a as “environmentally friendly” when it’s really “ozone friendly” but highly “global warming unfriendly”.
We’re going to be again shelling out big money within the next couple of years to replace a refrigerant that was sold as the “Big Saviour” of our environment. And has it really reduced or even helped to reduce the ozone depletion rate or did all the associated production and manufacturing of new components, materials and wastage just offset the real benefit?
And no one mentioned that R134a only has a usability life span of 14 years. So what are we going to do with all that recovered R134a refrigerant? Even though it was never labeled as flammable, it actually is highly flammable and toxic when it burns. If there was ever any measurable benefit from the use of R134a will that all be lost in the destruction of this very same gas?
So we can agree that R12 had to go but it had a cost of less than $10 AUD per kg and now we pay over $100 AUD per kg for R134a so what’s it going to cost for the next refrigerant replacement that is going to save our planet? One thing you can take to the bank is the cost of getting rid of the” Big Saviour” R134a is going to be built into the cost of the new kid on the block.
So who’s the big winner out of all of this? You can bet it’s not us the consumer and is there a real benefit to our environment? Just follow the money trail and if you’re not sure where that trail starts I would suggest the refrigerant council of Australia and benefit to the environment… yeah to the benefit of the chemical companies banking environment!
Is there a real answer to the protection our environment? Yes of course there is and we already have had the answer for many many years. The reason why these tried and proven technologies were not pushed? Simply there was no money in it for the chemical companies and all the hangers-on that jumped on the band-wagon and started hollering… the sky is falling the sky is falling, who also cashed in big time but now the cracks are showing up in the hype.
So the next time someone tells you that R134a is “environmentally friendly”… they clearly have no idea what they’re talking about and they are just blowing global warming gas out of their ___! You can fill in the blanks!
Written by Brian McCarthy.
Brian has more than 30 years in energy efficient equipment designs and applications.

Friday 4 October 2013

sunshine hd

sunshine HD

PRODUCT

SUN Shine TM HD. is a blend of high performance, aggressive acid detergents designed for heavy duty cleaning and brightening of equipment condenser coils, fins and other equipment surfaces. SUN Shine TM HD. is a industrial strength coil cleaner often used to clean uncoated coils. High foaming cleaning action pushes dirt, lint, greases and oils out of coils.

ADDITIONAL INFORMATION

SUN Shine TM HD. Coil Cleaner is the strongest, most powerful cleaner available for use on air conditioning and condenser coils. This acidic formula is especially effective for removing heavy scale build-up and oxidation from coils and other surfaces that are predominately aluminum. SUN Shine TM HD. easily removes corrosion and oxidation without scrubbing and leaves coils looking like new. For periodic cleaning and preventive programs, SUN Shine TM HD. may be diluted with up to 5 parts water, further reducing maintenance costs.
SUN Shine TM HD. is a concentrated, acid-based, high-foaming outdoor condenser coil cleaner and brightener. It effectively foams away stubborn dirt,insects, feathers, grass, leaves and other deposits from air cooled condenser coils. The expanding foam pushes contamination out of the coil and is easily rinsed away with water. In addition to removing contaminants, the SUN Shine TM HD formula effectively restores efficiency and reduces operating cost by removing hidden oxidation from the coil surfaces.

CHARACTERISTICS

  • Heavy foaming action
  • Solvent-Acid blend (pH: <2.0)
  • Removes oxidation - brightens aluminum
  • Non-flammable

USES

Deep cleaning of outdoor condenser coils to restore efficiency and increase performance of the system.

AREAS OF USE

OFFICE BUILDINGS, HOTELS, HOSPITALS, FACTORIES, SCHOOLS and FOR ALL AC MAINTENANCE ENGINEERS.

Thursday 3 October 2013

refrigerant

A refrigerant is a substance used in a heat cycle usually including, for enhanced efficiency, a reversible phase transition from a liquid to a gas. Traditionally, fluorocarbons, especially chlorofluorocarbons, were used as refrigerants, but they are being phased out because of their ozone depletion effects. Other common refrigerants used in various applications are ammonia, sulfur dioxide, and non-halogenated hydrocarbons such as propane.Many refrigerants are important ozone depleting and global warming inducing compounds that are the focus of worldwide regulatory scrutiny.


Wednesday 2 October 2013

To you, I say: Awesome! There's a lot of cool and random stuff out there, and these are just a few tidbits.


Gallium is a metal which melts on palm of the hand, due to its low melting point (29.76 °C). Submitted by: Karanpal Singh - Amritsar, IndiaTwenty percent of Earth's oxygen is produced by the Amazon forest. Submitted by: Jassim - Salem, India
The noble gas Xenon lasers can cut through materials that are so tough even diamond tipped blades will not cut.Submitted by: Josh Davies - Llanelli, WalesGold and Copper are the only two non-white metals.
The burning sensation we get from chilli peppers is because of a chemical called Capsaicin. Submitted by: Cam - England.The lighter was invented before the match (in 1816 by J.W. Dobereiner). Submitted by: Leah Hopson - Denver, United States
lightningEach time lightning strikes, some Ozone gas is produced, thus strengthening the Ozone Layer in the Earth's atmosphere.Honey does not spoil. Submitted by: Ashalaya - Racine, Wisconsin, United States
pure goldThere's enough gold in the Earth's crust to cover the entire land surface knee-deep.An average adult body contains around 250g (1/2lb) of salt.
The metal with the highest melting point is tungsten, at 3410 degrees Celcius (6170F).One inch (2.5cm) of rain is equal to 10 inches (25cm) of snow.
mosquitoMosquitoes like the scent of estrogen, hence, women get bitten by mosquitoes more often than men do.An ounce of gold can be stretched into a wire 80 kms (50 miles) long.
Natural gas has no odour. The smell is added artificially so that leaks can be detected.Air becomes liquid at about minus 190 degrees Celsius.
Mercury is the only metal that is liquid at room temperature.pure goldAbsolutely pure gold is so soft that it can be moulded with the hands.
Water expands by about 10% as it freezes.It is estimated that a plastic container can resist decomposition for as long as 50,000 years.
If you slowly pour a handful of salt into a totally full glass of water it will not overflow. In fact, the water level will go down.Hydrogen gas is the least dense substance.
Liquid air looks like water with a bluish tint.Hydrogen is the most abundant element in the Universe (75%).
Oxygen is the most abundant element in the Earth's crust, waters, and atmosphere (about 49.5%)The only letter not appearing on the Periodic Table is the letter J.
Hydrofluoric acid will dissolve glass.A bee sting is acidic and a wasp sting is alkali. To treat a sting by one of these you should use the opposite type of chemical.
The amount of carbon in the human body is enough to fill about 9,000 'lead' pencils.

Tuesday 1 October 2013

supply of REFRIGERANT GASES

We supply Refrigerant Gases and Refrigerant Oils in

 Delhi/ NCR. We are also supplier of Suva brand

 refrigerant gases. Our wide range of purity gases are

 in high demand for features like purity, accurate

 composition and eco-friendly. Besides, our products

 are packed in durable cylinders to ensure that the

 transportation of our products is easy and within the 

stipulated time. Moreover, our organization employs 

appropriate testing procedures to ensure that only 

optimum quality range of Purity Gases are supplied 

by. Further, our clients are satisfied with our products,

for we offer our products as per their requirements

and specifications. We want queries from India only


Monday 30 September 2013

Refrigeration tools at Tayal And Company

We bring forth a wide array of Refrigeration Tools:

Rexnord make Q motors & fans
Capacitors
Digital thermometer & hygrometer
Infrared thermometer
Anemometer
Digital Vacuum Gauge
Gauge Manifold
Universal Remote kit
Safety latches
Aluminium Copper Bond

Thursday 26 September 2013

FACTS

FACTS, DO YOU KNOW??

This is a collection of 10 fun and interesting basic chemistry facts.


1>Chemistry is the study of matter and energy and the interactions between them. It is a physical science that is closely related to physics, which often shares the same definition.

2>Chemistry traces its roots back to the ancient study of alchemy. Chemistry and alchemy are separate now, though alchemy still is practiced today.

3>All matter is made up of the chemical elements, which are distinguished from each other by the numbers of protons they possess.

4>The chemical elements are organized in order of increasing atomic number into the periodic table. The first element in the periodic table is hydrogen.

5>Each element in the periodic table has a one or two letter symbol. The only letter in the English alphabet not used on the periodic table is J. The letter q only appears in the symbol for the placeholder name for element 114, ununquadium, which has the symbol Uuq. When element 114 is officially discovered, it will be given a new name.

6>At room temperature, there are only two liquid elements. These are bromine and mercury.

7>The IUPAC name for water, H2O, is dihydrogen monoxide.

8>Most elements are metals and most metals are silver-colored or gray. The only non-silver metals are gold and copper.

9>The discoverer of an element may give it a name. There are elements named for people (Mendelevium, Einsteinium), places (Californium, Americium) and other things.

10>Although you may consider gold to be rare, there is enough gold in the Earth's crust to cover the land surface of the planet knee-deep.

INSULATION TAPES



INSULATION TAPES AT TAYAL AND COMPANY
We bring forth a wide array of Electrical Insulation Tapes that are extensively used in diverse industries for wide range of applications. The products we offer are ultimate in quick-stick properties and durability which provide long-lasting bond strength. Further, our range is suitable for insulation and protection of electrical parts and wires.








Wednesday 25 September 2013

packing tapes at tayal and company

Packing Tapes 

We offers a wide variety packaging products including box sealing tapes, filament tapes, hand-held dispensers, case sealers, packing list envelopes, padded tape products and more


Tuesday 24 September 2013

NITRILE TUBE

NITRILE TUBE



Product 

Nitrile Buna N Rubber Tube is a formidable tubing material used in high fuel usage environments. Nitrile tube has a concentration of Acrylonitrile-butadiene making it ideal for oils and solvents. The nitrile tubes are flexible and resilient. With such a high concentration of Nitrile in the composition of the tube, the nitrile rubber tube has limited stretching ability.

Applications 

Used in fuel line applications and petroleum tanks primarily. Other uses include fuel line in petroleum motors, vacuum lines, petrol fluid transfer tubing and line in / line out for lab testing of caustic fluids.




Monday 23 September 2013

copper pipes at tayal and company

Copper Pipes

Sizes
OD 3mm to 125mm

WT
0.03mm to 6mm

Applications

>Copper tubes for Air-conditioning, VRV Units, Refrigeration as per BS 2871 CuDHP Grade

>Copper Tubes for Medical Gas Pipeline Systems as per BS 2871 Part 1Table X(EN 1057)

>Copper Tubes for Plumbing and Fire fighting as per BS 2871 Part 1 Table X(EN 1057)

>Copper Pipes for Earthing Electrodes as per BS 2871 Part 1 CuDHP Grade

>Copper Pipes for use in electrical transformers as per BS 2871 Part 2, C101 , (ASTM B-188-81)

>Copper Pipe for LPG and natural Gas Pipeline IS2501


Saturday 21 September 2013

aristocoat

Aristocoat

Product profile

ARISTOCOAT 018 is solvent based product, made out of carefully selected additives, which offers cold rolled (galvanized) steel, tubes & pipes excellent corrosion protecting in condensation & open shed conditions. It can be used for finished products like roofing's, seem-less tubes, conveyors & auto components, where long term rust protection is required in idlie conditions.

Applications

ARISTOCOAT 018 is suitable all types of cold rolled steels,Condensers,Evaporators, roofing's & auto components, Panels, structures & more. Itcan be applied where long term rust protection is requried in idle coditions where coating need not be removed.
It is suitable for all type ferrous materials.
It is suitable for, conveyors where cleaning of product is not required.
Can be appliedby brush, spraying & dipping.
On the dried layer of ARISTOCOAT 018, painting can be done.

Benifits

Presence of high performance additives ensures you better corrosion protection.
It forms a thin solid layer on the surface of component after 8 hours of application, touch dry 15 minutes.
It gives upto 18 months protections in packed indoor condition & 12 months in outdoor packed conditions.

Friday 20 September 2013

Water Tower Treatment

Water Tower Treatment

BWA's Tower Pro® products represent a flexible, multi functional water treatment program in easy to use tablets. Towerpro products are developed for the small systems where good service and pumping equipment can not be justified. Towerpro is formulated with the best in class chemistries to deliver excellent performance for scale, corrosion, slime, and algae control. It also reduces water blowdown to achieve higher water concentration cycles. Towerpro has an extended shelf life.



Thursday 19 September 2013

jokes

Chemistry Jokes and Riddles

I asked the guy sitting next to me if he had any Sodium Hypobromite…
He said NaBrO
Q: What is the show cesium and iodine love watching together?
A: CSI
Q: What is the chemical formula for "coffee"?
A: CoFe2
Q: What is the chemical formula for "banana"?
A: BaNa2
Q: What do you do with a sick chemist?
A: If you can't helium, and you can't curium, then you might as well barium.
If the Silver Surfer and Iron Man team up, they’d be alloys.
Q: Did you hear oxygen went on a date with potassium?
A: It went OK.
We would like to apologize for not adding more jokes... but we only update them.... periodically!
Q: Anyone know any jokes about sodium?
A: Na
Making bad chemistry jokes because all the good ones Argon
Q: What is the most important rule in chemistry?
A: Never lick the spoon!

Tuesday 17 September 2013

REFRIGERANT GAS

Whats is REFRIGERANT GAS??

Refrigerant gas is a chemical product used in refrigerators, freezers, air conditioners and heating, ventilating and air conditioning units (HVAC).  These gases, which have very low evaporation points, are condensed under pressure to chill the air.  Through a process of repeatedly evaporating and condensing the gasses, heat is pulled out of the air and the temperature inside the room or unit is reduced.  Different types of refrigerant gases include chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), hydrofluorocarbon (HFC), perfluorocarbon (PFC), and blends made from ammonia and carbon dioxide.

The first refrigerators built from the 1800’s until the 1920’s primarily used toxic gases such as ammonia (NH3), methyl chloride (CH3Cl), and sulfur dioxide (SO2).  Unfortunately, the units occasionally leaked and caused several deaths, which prompted the refrigeration industry to put forth a concerted effort to find a safer refrigerant gas.  The result was the discovery of chlorofluorocarbon (CFC) gas, which was a mixture of chlorine, fluorine and carbons. Freon&reg; became the trademark name for a CFC gas that was primarily used as a refrigerant.  This gas was colorless, odorless, nonflammable and non-toxic, and soon became the predominant refrigerant gas.

In the 1970’s, scientists discovered that when CFCs leaked into the atmosphere, a chemical change occurred as a result of exposure to the ultraviolet rays of the Sun, resulting in a greenhouse effect and depletion of the ozone.  Since that time, Freon&reg; has been banned in many countries throughout North America and the European Union.  In the United States, the Environmental Protection Agency (EPA) and the Clean Air Act established strict guidelines for the installation, repair, recovery and recycling of refrigerant gas.  The European Union (EU) has also enacted strict controls through the EU F-gas regulations.

Some applications have replaced CFCs with HCFCs, which are a mixture of hydrogen, chlorine, fluorine and carbon.  These have a shorter life when exposed to the atmosphere, resulting in less potential damage to the ozone.  Another popular refrigerant gas is HFC, which contains no chlorine and is thought to have absolutely no negative effect on the ozone.  PFCs are man-made chemicals composed of only fluorine and carbon ions, and are also considered ozone-safe.  These replacement refrigerant gases still cause environmental concerns if they leak into the atmosphere because they are considered greenhouse gases and may contribute to climate change.

Many industrial applications have moved back to naturally occurring refrigerant gas such as blends of ammonia and carbon dioxide, and research continues to search for more environmentally friendly ways to meet refrigeration needs.  Refrigeration units must also be built to specific standards and commercial applications are subject to strict monitoring.  Many countries, such as Canada, the UK, members of the EU, Australia, New Zealand, Japan and the United States require technicians who work on any units containing refrigerant gas to be licensed and certified.

Refrigeration has had a significant positive impact on life and society in the areas of nutrition, medicine, and physical comfort.  The toxic gases of the early days have been replaced by refrigerant gas which works effectively and poses no health danger.  Environmental concerns do exist regarding the use of these compounds, yet many believe that strict standards for equipment and maintenance have mitigated any negative environmental impact.

chemical facts

Chemistry is a fascinating science, full of unusual trivia! Here are some fun and interesting chemistry facts for you.
  • The only elements that are liquid at room temperature are bromine and mercury. However, you can melt gallium by holding a lump in the warmth of your hand.
  • Unlike many substances, water expands as it freezes. An ice cube takes up about 9% more volume than the water used to make it.
  • If you pour a handful of salt into a full glass of water, the water level will actually go down rather than overflowing the glass.
  • There is about 1/2 lb or 250 g of salt (NaCl) in the average adult human body.
  • A pure element can take many forms. For example, diamond and graphite both are forms of pure carbon.
  • The chemical name for water (H2O) is di hydrogen monoxide.
  • The only letter that doesn't appear on the periodic table is J.
  • Lightning strikes produce O3, which is ozone, and strengthen the ozone layer of the atmosphere.
  • The only two non-silvery metals are gold and copper.
  • Although oxygen gas is colorless, the liquid and solid forms of oxygen are blue.
  • The human body contains enough carbon to provide 'lead' (which is really graphite) for about 9,000 pencils.
  • Hydrogen is the most abundant element in the universe, while oxygen is the most abundant element in the earth's atmosphere, crust, and oceans (about 49.5%).
  • The rarest naturally-occurring element in the earth's crust may be astatine. The entire crust appears to contain about 28 g of the element.
  • Hydrofluoric acid is so corrosive that it will dissolve glass. Although it is corrosive, hydrofluoric acid is considered to be a 'weak acid'.
  • One bucket full of water contains more atoms than there are bucketfuls of water in the Atlantic ocean.
  • Approximately 20% of the oxygen in the atmosphere was produced by the Amazon rainforest.
  • Helium balloons float because helium is lighter than air.
  • Bee stings are acidic while wasp stings are alkaline.
  • Hot peppers get their heat from a molecule called capsaicin. While the molecule acts as an irritant to mammals, including humans, birds lack the receptor responsible for the effect and are immune to the burning sensation from exposure.
  • Dry ice is the solid form of carbon dioxide, CO2.
  • Liquid air has a bluish tint, similar to water.

Monday 16 September 2013

Quality Assurance with TAYAL AND COMPANY

Quality Assurance with TAYAL AND COMPANY

Since our inception, quality has been the keyword for us. The products which are sourced from the trusted manufacturers of the markets are checked by our professionals in compliance with international quality standards. Our aim is to offer quality products as per the exact specification of our clients. Our range is supervised on the basis of following parameters:


Durability
Corrosion resistance
Functionality
Effective performance
Low maintenance
Longer functional life


Saturday 14 September 2013

Refrigerant Gases and Refrigerant Oils

We supply Refrigerant Gases and Refrigerant Oils in Delhi/ NCR. We are also supplier of Suva brand refrigerant gases. Our wide range of purity gases are in high demand for features like purity, accurate composition and eco-friendly. Besides, our products are packed in durable cylinders to ensure that the transportation of our products is easy and within the stipulated time. Moreover, our organization employs appropriate testing procedures to ensure that only optimum quality range of Purity Gases are supplied by us. Further, our clients are satisfied with our products, for we offer our products as per their requirements and specifications. We want queries from India only.
We have appointed a team of professionals that supports us in carrying out all our business activities efficiently. Furthermore, we have a large and spacious warehouse for the bulk storage of our products. Our quality professionals keep a strict vigil on the quality of the products before the final delivery.